Latest technology Curing light-LT

Latest technology Curing light-LT

Introductions:
1. the shiner is more powerful than LED,can solidify any material;
2. fast,solidify depth 3-4mm in 5~10 second;
3. microcomputer controlled 3 work mode:gradually
stronger,flash,smooth;
4. automatic timing at every 10 second;
5. automatic power-off after 3 minute;
6. the shiner is small enough to be settled at the tip,so the tip is
very small(diameter 12mm) and there is no light-leader with bend,so:
7. no need wide-opened mouth;
8. no obstacle to the doctor's line of sight;and
9. cold,almost no heat can be felt;
10. the shiner can work more than 10,000 hours;
11. spend little energy:can work more than 100 times after a well recharging;
12. small and light:length 173mm,the handle diameter 23mm,about 50g
13. voltage 100-240V,50-60Hz;power 1-5W.

parameters:
wavelength:400-490nm,
light intensity:550-580mv/square mm,
power source:110-240V,50-60Hz,
power expended:1-5W

Trademark: YS
Model NO.: ys1
Company: Shengood International Group Ltd.